Gazelle bosch performance series User Manual Download Page 67

Page: 67 / 74

BOSCH PERFORMANCE LINE

English–

Bosch eBike Systems

0 276 001 USPen | (22.6.15)

540

Temperature error

The eBike is outside of the permissible temperature range. Switch

off the eBike system and allow the drive unit to either cool down or

heat up to the permissible temperature. Restart the system. If the

problem persists, contact your Bosch eBike dealer.

550

An improper load was detected.

Remove the load. Restart the system. If the problem persists,

contact your Bosch eBike dealer.

580

Software version error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

591

Authentication error

Switch off the eBike system. Remove the battery pack and reinsert

it. Restart the system. If the problem persists, contact your Bosch

eBike dealer.

592

Incompatible component

Insert a compatible display. If the problem persists, contact your

Bosch eBike dealer.

593

Configuration error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

595,

596

Communication error

Check the wiring to the transmission and restart the system. If the

problem persists, contact your Bosch eBike dealer.

602

Internal battery pack error while charging Unplug the charger from the battery pack. Restart the eBike sys-

tem. Plug the charger into the battery pack. If the problem persists,

contact your Bosch eBike dealer.

602

Internal battery pack error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

603

Internal battery pack error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

605

Battery pack temperature error

The eBike is outside of the permissible temperature range. Switch

off the eBike system and allow the drive unit to either cool down or

heat up to the permissible temperature. Restart the system. If the

problem persists, contact your Bosch eBike dealer.

605

Battery pack temperature error while

charging

Unplug the charger from the battery pack. Allow the battery pack to

cool. If the problem persists, contact your Bosch eBike dealer.

606

External battery pack error

Check the wiring. Restart the system. If the problem persists,

contact your Bosch eBike dealer.

610

Battery pack voltage error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

620

Charging error

Replace the charger. Contact your Bosch eBike dealer.

640

Internal battery pack error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

655

Multiple battery pack errors

Switch off the eBike system. Remove the battery pack and reinsert

it. Restart the system. If the problem persists, contact your Bosch

eBike dealer.

656

Software version error

Contact your Bosch eBike dealer so that he can perform a software

update.

7xx

Transmission error

Please observe the operating instructions provided by the

transmission manufacturer.

display

Internal error in the on-board computer

Restart your eBike system by switching it off and back on.

Code Cause

Corrective Action

OBJ_BUCH-2209-003.book Page 33 Monday, June 22, 2015 11:18 AM

Summary of Contents for bosch performance series











































































Search results

Summary of Contents for bosch performance series

Reviews:

Related manuals for bosch performance series

Brands by name

Popular brands

Gazelle bosch performance series, User Manual

Search results

Summary of Contents for bosch performance series

Reviews:

Related manuals for bosch performance series

Brands by name

Popular brands