1. Take a Center Arch 10-411 and on each end of it, assemble a Corner Arch 11-555. Secure the Male
and Female Door Rail 11-556 and 11-557 to the arch 11-555 with the pipes holder 10-405.
2. Slide the Rail Hooks M over the Door Rails before tightening. Add the T-Bar 11-558 to the Door Rails
and the center arch.
3. On each end of 11-555, install the Leg 10-410. Repeat step 1 for all frames.
4. At this point stand up the front or back frame and add 7 male connecting pipes 10-367. Then stand up
another frame and add 7 female connecting pipes 10-408. Connect the first and second frame with
diagonals 10-368.
5. For the remaining frames use the male connecting pipes 10-367. Add the diagonals 10-368 to the last legs
10-410. Note: Make sure all screws are tight. Do not over-tighten.
STEPS
Summary of Contents for 7171001
Page 4: ...SCH MA SCHEMA...
