ZZZ-212.43200MR.0608-20.GP.EN.doc WEB VERSION 10
Before You Assemble the Gazebo
Please don't destroy boxes until completely assembled.
For future reference, take pictures of all six sides of each of the boxes upon receipt.
Please verify the content of each box against the list of parts.
It is important that this gazebo be anchored on a solid base with the provided screws.
Otherwise, please ensure that you use anchors sufficient for your surface.
The gazebo should not be installed adjacent to trees or a sloped roof. Snow and ice
may slide onto the gazebo and cause it to collapse.
Tools required (not provided)
6ft (1.8m) Stepladder
Robinson #2 Screwdriver
Mallet
Safety Gloves & Glasses
Tarp or protective material for placing
parts on during assembly
Tape Measure
Leveling Shim
Step 1:
1. Assemble B
eams “A” and “B” using Center Plate “F”, by sliding it inside the beams and
securely tighten with 10 B
olts “Pp”.
2.
Lay out the assembled Beams in a rectangle
and join at each corner with a Corner Plate “E”,
by sliding it inside the beams and tighten it with 4
Bolts “Pp” tightly and hand fasten remaining
4 Bolts.
– see image on pg. 8
