ZZZ-184.41218.1116-20.GP.EN.doc
WEB VERSION
8
Step 4:
1. Attach roof rafters (L) to the central hub (N) using bolt (Bb). (Caution: hub may be heavy,
use support if needed)
2. Use screws (Bb) attached to brackets to affix the roof rafter (Xx) onto the top of the
middle of the door panel.
3. Use screw (Z) to affix the other rafters (L) onto the top of panels going through the metal
piece attached to the rafter (L).
Note:
Rafters must be affixed where panels connect to each other.
Step 5:
Use the same method to assemble roof rafters (K) for the angled panels. The metal piece
affixed to the rafter (K) is adjustable, chose one hole to affix the rafter (K) to the top of the panel.
Note:
1) The K Rafter has 1 bracket with 2 holes. Attach roof with 1 screw when installing on top
of the frames. Make sure that extra hole on bracket remains on the side of angled panel (at the
corner). Then screw it to frames with screws (Z).
2) Do not tighten the bolts right away as you may have to adjust the angle when inserting
the PC roof panels.
(1)
(2)
(2)
