ZZZ-184.41218.1116-20.GP.EN.doc
WEB VERSION
10
Step 8:
After inserting the upper PC panels, insert the aluminum middle roof joints (O, P, Q, Pp)
into the roof rafters. The below drawing view is from inside the solarium looking up.
Notes:
The drain holes on the aluminum middle roof joints (O, P, Q, Pp) should be at the
bottom.
To adjust the middle joints to line up : once all polycarbonate roof panels are in place,
use a small piece of wood and hammer, then tap down on the middle of the joint
bringing it down and holding at the same time the joint and top polycarbonate.
Do not tap too hard.
Step 9:
After the installation of the middle roof joints complete, insert the bottom PC roof panels (Jj,
Kk, Mm, Rr) according to below drawing instructions. They should overlap about two inches
under the upper PC roof panels and into the aluminum middle joints.
Before
After
Before
After
TOP VIEW
