- 4 -
1 Rules
GENERAL CAUTION
•
The installation will have to be
in compliance
with the norms in force and be carried out
according to traditional rules by a skilled worker..
•
The installer will have to refer to the various existing official documents according to the
different stages that the installation will require
(see enclosure 1 at the end of this
document).
•
The radiant tubes are CE certified and approved for use in many countries. In order to
meet the national requirements only appropriate models should be used (in case of
doubt, please contact us). The guarantee of conformity to regulations and standards
does not apply to units designed for the French market but installed in foreign countries.
•
The hotpoint of the heater amounts to more than 150°C. Please follow the directives of
the competent authorities and respect the rules in force related to classified buildings or
risky sites.
•
The use is also prohibited in all the premises where there are corrosive fumes, even if
there are small quantities of them, whose combination with water vapour and/or
combustion products will entail abnormal deteriorations of the appliances. For example :
chlorinated, sulphurous, ammonia or sodium products and diverse acid products
•
All the requirements of the present regulation concerning ventilation and purifying shall
be respected.
GUARANTEE LIMITS
Warranty is void if following instructions are not respected:
•
The heaters are only designed for use in non domestic applications with exclusion of any
other utilization.
•
Heaters must be installed inside the room, protected against humidity and bad weather
conditions.
•
Heaters must not be installed in atmospheres containing aggressive or corrosive
vapours, even in small concentrations as the combination with combustion products can
deteriorate the material (e.g. : chloride, sulphurous, ammonium, sodium and all kind of
acid products)
•
Storage of heater must be done carefully avoiding shocks and ensuring that heater is
protected against bad weather conditions.
•
The installation must be in accordance with these instructions
•
Modification to this appliance is not authorized
Summary of Contents for BTwin BTH25
