background image

Inspection, maintenance and repair

   Warning! Disconnect the LED fixture from mains before performing any maintenance or repairs. 

   Warning! Do not connect or disconnect the LED fixture under load. 

   Warning! Do not open or disassemble the LED fixture; there are no serviceable parts inside. Opening the LED fixture can be 

dangerous and will void the warranty. 

   Warning! Always allow for a cool-down period of at least 30 minutes before touching the LED.

  Caution! Do not clean the LED fixture with detergents, abrasives or other aggressive substances. 

• 

Regularly check the LED fixture for dust or dirt buildup. Clean if necessary. Contamination may cause overheating and 

decreased performance. Clean the outside of the LED fixture using a dry or damp cloth.

• 

Regularly check the cables of the LED fixture to ensure it is undamaged.

8.1 

How to disconnect the Wieland RST16i5 plug

   Warning! Do not connect or disconnect the Wieland RST16i5 plug when under load.  

• 

Switch off main power.

• 

Turn the ring on the Wieland RST16i5 female connector counterclockwise and 

pull the Wieland RST16i5 female connection from the LED fixture (fig. 21).

Storage and disposal

• 

Store the LED

 

fixture in a dry and clean environment, with an ambient 

temperature of -4~185° F / -20~85° C.

• 

The product must not be discarded as unsorted municipal waste, but must be 

collected separately for the purpose of treatment, recovery and environmentally

   sound  disposal. 

10 

LIMITED WARRANTY:

 

When purchased from an authorized Hawthorne dealer, this product is covered by a LIMITED WARRANTY, available at 

hawthornegc.com/warranties. You can also obtain the Terms of Sale and Limited Warranty by calling Hawthorne toll-free

at: 1-888-478-6544 or writing Hawthorne at: Hawthorne Hydroponics LLC, 3204 NW 38th Circle, Vancouver, WA 98660., 

Attn: Customer Service.

201021al

Manufactured for Hawthorne Hydroponics LLC,
a subsidiary of The Hawthorne Gardening Company,
3204 NW 38th Circle, Vancouver, WA 98660
HawthorneGC.com | Canada: HawthorneGC.ca | 

P  

+1-360-883-8846 | 

E  

info

@

gavita.com

©2020 World rights reserved.

21.   

Summary of Contents for CT 1930e









Reviews: