| Equipment Set Up | User Guide |
9
BREAST ASSEMBLY
The package comes with one torso and 3 pairs
of differing left and right breasts. The S230.40
Breast Palpation Simulator is shipped with one
pair of left and right breasts already attached to
the torso.
1. Collect the torso assembly and the breasts
you wish to use for the procedure.
2. If necessary, remove the pre-assembled
left and right breasts: gently lift up each breast
until your fingers touch the Velcro attachment,
then remove the breast by separating it from
the torso. When removing the breast from the
torso, do not apply force directly to the breast
tissue.
3. Please ensure that the torso is clean and
that nothing will obstruct the placement of the
breasts
4. Align and gently press the breast’s Velcro
strip onto the torso’s Velcro strip.
POSITIONING
The Manikin is made to function in the upright
(vertical) or prone (horizontal) position. Do not
rest the manikin on its breasts as this can result
in damage to the breasts.
Summary of Contents for S230.40
