tablet which is used to initialize the simulator
and control vital signs. Double click the UNI
icon on the tablet’s home screen to start.
4.
The simulator selection menu will appear.
Select the corresponding simulator: Pediatric
HAL Five Year or Pediatric HAL One Year.
5.
When selecting the appropriate
profile, be sure that the correct serial
number from your simulator is entered
into the profile and click Start..
6.
Once the software is turned on and
loads, the simulator will establish
communication and turn on.
7.
To turn off the simulator, close the UNI software.
Adding a Serial Number to the Profile
1.
Select the desired profile.
2.
Click the "+" button to the right
of the serial number.
3.
A "New Serial Number" pop up will
appear. Type in the numerical serial
number of the simulator and click Set!.
4.
Click the Start button to initialize the simulator.
NOTE: After clicking Start, the
wireless link between UNI and the
simulator will be established.
A pop up will appear stating the simulator
is establishing communication and
once the gray bar loads completely
blue, the simulator will turn on.
PEDIATRIC HAL®
|
User Guide
Initial Setup | 17
Summary of Contents for PEDIATRIC HAL S3004
Page 2: ......
