P.17
Pitch : +15
IMPORTANT
請注意
4. The CF blades are highly recommanded for
3D flight. Be sure to balance your blades
before flying.
5. Maximum pitch : -15 degrees to +15 degrees.
1. Total collective pitch range for 3D should
be approx 30 degrees ( -15 ~ +15 ).
Normal flight should be about +15 to -3
degrees.
2. The recommended hovering head speed
should be at least 3000rpm. This can be
checked with a tachometer.
If the helicopter is unstable in a hover, reduce
the pitch at this throttle setting to gain more
head speed.If this does not solve the problem,
increase the throttle curve.
3. Refer to the next page for getting more
informations about setting.
Head speed and pitch settings
主旋翼轉速與螺距設定
請參考下頁說明設定螺距與油門曲線。
3D飛行時螺距行程約為 -15 ~ +15 度，
一般飛行約為 -3 ~ +15 度。
設定螺距時請參考左列說明。
設定螺距時請參考左列說明。
設定螺距時請參考左列說明。
主旋翼停懸轉速建議勿低於3000rpm
(可用轉速計測量)，戶外飛行或
有風的狀況時，需適當增加停懸轉速。
建議使用碳纖槳以獲得較佳3D性能，每對
槳在第一次使用前需先做好配重平衡。
Pitch : 0
螺距最大值分別為 15 度
Pitch : -15
Pitch Setting
螺距設定
Summary of Contents for Hurricane 255
Page 28: ......
