6
!
Installation of Dash Cam
1. Ensure windscreen is clean and free of debris. Attach suction cup to
the windscreen and lock into position with the lever.
2. Fix where the vision is not blocked (Place close to rear-view mirror
is recommended). Don't install device on airbag or within its working
range.
3. Insert Micro SD card into the Dash Cam
4. Insert Mini USB end of the 12V power adapter into the Mini USB
interface/ charging point of the Dash Cam. Connect socket end of the
adapter into the into 12V power socket of vehicle.
5. Adjust the mounting bracket and rotate the camera direction to get
the best view. Ensure of the vehicles bonnet is visible from the
bottom of the screen for alignment.
6. Turn vehicles ignition to accessories, and the Dash Cam will power
ON and start recording automatically, you will hear an audible tone
once powered.
7. The blue power indicator LED will show when the Dash Cam is
receiving power.
8. A red circle on screen will start flashing when recording has started.
9. For the Dash Cam to work it must receive power from the charging
adapter. Once power is removed or turned off the Dash Cam will save
the current file and turn off.
ATTENTION:
The Dash Cam must be connected to power when in use. The super
capacitor only holds date and time settings. The Dash Cam has no
internal battery.