User Manual
Page 7
Connecting to a Bluetooth device
Before connecting the DIA-400S to a Bluetooth device, you will need to mount the antenna to the back of the amplifi er. Then go to the
settings of the Bluetooth device and connect to “Gato Audio DIA-400S”.
To switch a connected device to another, either go to the Bluetooth settings of the connected device and disconnect the amplifi er or press
the BT Connect button on the back of the DIA-400S. Then connect the new device.
The BT Connect buton on the back of the amplifi er will blink when it is ready but not connected to a device. The button will light up
continuesly when the amplifi er is connected to a device.
Connecting a computer to USB
Before connecting the DIA-400S to your computer via USB, please read installation instructions on page 11.
Connecting an Apple iPad to USB
It is possible to stream music from an iPad to the USB port of the DIA-400S. An Apple Camera Connection Kit is required for this feature. The
kit is available from the Apple online store or other Apple accessory shops.
Plug the camera connector into the iPad dock connector and connect it to the DIA-400S with a USB cable. Simply start your music app and
enjoy the music.
Connecting an Apple iPhone to USB
Like the Apple iPad it is possible to stream music from an iPhone to the USB port of the DIA-400S. The procedure is exactly the same as for
the iPad, however it is only possible for iPhones with IOS 7 and later.
