![background image](http://html1.mh-extra.com/html/gato-audio/cdd-1/cdd-1_user-manual_570091010.webp)
Gato Audio CDD-1 - CD-player / DAC
Page 10
Digital Input
When a digital input has been selected, the display will change. Small numbers will light up outside the scale
and track display will show bit rate. If no signal is recognized by the CDD-1, the display will show a double
dash and the arrow will point at zero.
DAC Mode
Before connecting the CDD-1 to your computer via USB, please read installation instructions on page 12.
Input Selection
RC-1 Type 1: Press Input on the CDD-1 or the button on the RC-1 system remote to switch between input
sources on the CDD-1.
RC-1 Type 2: Press Input on the CDD-1 or the button on the RC-1 system remote to switch between input
sources on the CDD-1.
total
track
bit
3
2
4
4,
1
48
88,2 96
1
7
6
,4
19
2
time
Depth and Resolution
When a digital signal has been recognized by the CDD-1, the bit depth will be displayed and the arrow will
indicate the resolution, as shown in the example to the right; 24 bit, 48 kHz.
Changing Input While Playing a CD
If you change input on the CDD-1 while playing a CD, the CDD-1 will automatically pause playback. If you
return to the CD input within a minute, the CD will automatically resume playing. If you do not return to the
CD input within a minute, the CD will stop.
total
track
bit
3
2
4
4,
1
48
88,2 96
1
7
6
,4
19
2
time
total
track
bit
3
2
4
4,
1
48
88,2 96
1
7
6
,4
19
2
time
CD
S/PDIF
USB
RC-1 type 1
RC-1 type 2
VOLUME
VOLUME