TIRE CHANGER FOR TRUCK TWC-1600
20
13) Lower the spindle until the wheel is resting on the platform.
14) Move the platform towards the outside until the tire completely off
the
rim. Watch out for the valve!
WHEELS WITH 5-SEGMENT SPLIT RINGS
1) Clamp the wheel on the spindle as described previously make sure it is
deflated.
2) Lower the tool carrier arm (14 Fig .D) to its work position until its hook has
clicked into position on the bar.
3) Use the joystick to position the wheel so that the bead breaker disk touches
up against outside edge of the center well rim.
4) Turn the spindle and at the same time move the bead breaker disk forward
until the split-ring is detached. Watch out for the O-ring.
5) Repeat this operation but this time move the disk against the split-ring(see
Fig. Z) until the locking ring is released. This ring can be removed with the
special TL lever (19, Fig. Z) or with the help of the bead disk.
6) Remove the O-ring.
7) Move the tool carrier arm (14, Fig. D) back from the edge of the rim.
Release the hook and tip the arm to its non-working position.
8) Press lever (19, Fig. D)and turn the tool head 180º which will automatically
lock in this position. Lower the arm to its working position.
9) Turn the spindle and at the same time bring the bead loosener disk up
against the tire between the rim and bead. Move the disk into the tire only
when the bead has started to detach from the rim and move the bead to the
outside edge of the rim. (NB: Lubricate during this process).
Take the mobile control unit to work position B.
Take the mobile control unit to work position C.
Take the mobile control unit to work position D.
