Instructions for PY1200AC/PY1800AC/PY2500AC
12
It is extremely dangerous that without or
incorrect installation of the limit switch stops
can cause crash of gate, damage of internal
structure of the motor, moreover, the gate may
slide off the guide rail.
Setting the Limit Switch Stops
Closed Position
·
Position gate 150-200mm back from the gate end catch closed position. This will help in
making sure you do not slam the gate into the end stop/catch when setting the closed position
under power.
·
Fit limit switch stop onto the top of gear rack at the point where it meets the Spring/Magnetic
limit switch on the motor.
·
Tighten locking screws of limit switch stop.
Spring limit switch
Magnetic limit switch
