Instruction for GT800ACL/GT1000ACL/GT1500ACL/GT2000ACL
www.gatexpertstore.com
5
Additional remote controls:
Spare/Additional remotes for the automatic gate kit, these will need to
be paired to the motor.
Infrared photocell:
Detects pedestrians, vehicles and objects that cross an infrared beam and
prevents the gate from closing.
Wireless keypad:
Allows secure access through the gate used with a user set code.
Wired control:
Allow users to control the opening and closing of the door through an external
push-button.
Alarm lamp:
Alerts people near the gate and users that the gate is in operation.
Technical Parameters
Model
GT800ACL GT1000ACL GT1500ACL GT2000ACL
Power Supply
110VAC/60Hz; 220VAC/50Hz
Motor Power
370W
400W
550W
750W
Gate Moving Speed
11-13m/min
Maximum Loading Weight
800KG
1000KG
1500KG
2000KG
Remote Control Distance
≥30m
Remote Control Mode
Single button mode / Three button mode
Limit Switch
Spring limit switch / Magnetic limit switch
Working Noise
≤60dB
Working Duty
S2, 20min
Recording of up Remote Controls
Standard control board: 25; Intelligent control board: 40
Remote Frequency
433.92 MHz
Working Temperature
-20°C - +70°C
Package Weight
22KG
22.39KG
23KG
23.5KG
Installation
Before You Start
·
GT800ACL/GT1000ACL/GT1500ACL/GT2000ACL Sliding Gate Automation Kit is suitable for
powering the opening and closing motion of gates up to 800kg,1000kg, 1500kg,2000kg in
weight, up to a length of 12m. (Standard kit contains a 6m chain, if the gate length is over 5.5m,
please consider to extend the length of the chain.)
·
Gate motion is achieved by the rotating output sprocket of the gate opener driving the chain
fitted to the moving gate.
·
The gate opener requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
·
The gate opener itself must be fitted within private property, never externally to a property’s
boundary.
Any works done to the gate opener must be completed whilst the power is off and the opener is
unplugged. Any modifications/alterations/works to AC power components must only be completed by
a licensed electrician.