GA600AC Sliding Gate Opener User Manual
22
WIFI Controller (Optional)
I. Main parameters of the module:
1). Power Supply: AC110V/220V
2). Output single channel signal
3). Can accept closed in place signal
II. Wiring Instruction
Figure 20
As shown above:
Output Terminal:
Output signal, should connect to “O/S/C” and “COM” terminals on the
motor control board.
Position Feedback Terminal:
Open or Closed in place feedback signal. Should connect to
open/closed in place terminal if the motor control board has a standalone terminal for it. If
the control board doesn’t have a standalone terminal, then should connect to the door
magnetic alarm.
Power: S
hould connect to AC 110V/220V mains power.
III. Connect to Equipment
Make sure your mobile phone has connected to the internet through 2.4G WIFI.
This WIFI device only supports 2.4G WIFI. If you router supports both 5G and 2.4G WIFI,
please select 2.4G WIFI.
