GA600AC Sliding Gate Opener User Manual
12
Setting the Limit Switch Stops
Closed Position
·
Position gate 150-200mm back from
the magnet bracket closed position. This
will help in making sure you do not slam
the gate into the end stop/catch when
setting the closed position under power.
·
Fit magnet bracket onto the top of gear
rack at the point where it meets the Magnetic limit switch on the motor.
·
Tighten locking screws of limit switch stop.
Open Position
·
Position gate 150-200mm back from
the magnet bracket open position. This
will help in making sure you do not slam
the gate into the end stop/catch when
setting the open position under power.
·
Fit magnet bracket onto the top of
gear rack at the point where it meets the Magnetic limit switch on the motor.
·
Tighten locking screws of limit switch stop.
Test the magnetic limit switch stops by moving the gate manually until you hear a click, making sure
contact is made with the magnetic limit switch on the motor.
To Reset: Turning the power off will reset the limit switch stop memory. Power on the gate
opener again, pressing remote control or external push button switch to open and then
close the gate once, then new limit switch stop setting is completed.
Magnetic limit switch
Magnetic limit switch
