Gateway TP-A60W, Service Manual

Page: 76 / 179

Machine Maintenance Procedures
3-5
Getting Started
0
The flowchart ( Figure 3-1 ) identifies sections illustrating the entire removal and install
sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1. Place system on a flat work surface.
2. Disconnect AC Adapter and remove all cables from system and peripherals.
3. Make sure system is completely powered down.
4. To make sure system is completely powered down, press and hold power button (A) for 4
seconds. (Figure 3-2)
a. If the device is in powered down mode, allow device to complete boot process
(approx. 10 sec.). Then power down normally.
b. If device is in sleep mode, wait for Home Screen to clear. Then power down
normally.
Figure 3-2. Device Overview with Power Button
5. Press and hold Power button for 4 seconds to show Tablet Options dialog.
6. Select Power Off to power down device.
7. From Power Off dialog, select OK.
A
SG_GW_MAYA.book Page 5 Tuesday, August 2, 2011 10:03 AM