Gateway Solo1450, Service Manual

Page: 24 / 73

19
Replacing the keyboard cover
www.gateway.com
Replacing the keyboard cover
Tools you need to complete this task:
To replace the keyboard cover:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in “Preparing your notebook” on
page 5.
2
Open your notebook.
3
Insert a flat-blade screwdriver or non-marring tool into the small notch
in the bottom of the keyboard cover just above and between the
Ins and
Del keys, then carefully pry the cover up.
Important To prevent damage to your notebook while using a
screwdriver, insert a piece of cloth between the
screwdriver, the keyboard, and your notebook case.
Flat-blade screwdriver Scribe or non-marring tool - OR -