Gateway ML6226b, Service Manual

Page: 72 / 78

Replacing Notebook Components
68
9
Remove the palm rest by following the instructions in “Replacing the palm rest” on page 56 .
10
Remove the two hex nuts that secure the external video board to the notebook.
11
Remove the two screws that secure the external video board to the notebook.
12
Install the new external video board into the notebook, then replace the screws removed
in
Step 11 .
13
Replace the two hex nuts removed in Step 10 .
14
Replace the palm rest by following the instructions in “Replacing the palm rest” on page 56 .
15
Replace the LCD panel assembly onto the notebook by following the instructions in
“Replacing the LCD panel assembly” on page 38 .
16
Replace the keyboard by following the instructions in “Replacing the keyboard” on page 31 .
17
Replace the keyboard cover by following the instructions in “Replacing the keyboard cover”
on page 29 .
18
Replace the hard drive kit by following the instructions in “Replacing the hard drive” on
page 26 .
19
Replace the DVD drive by following the instructions in “Replacing the DVD drive” on
page 11 .
20
Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.
Hex nuts
Screw
Screw