Gateway M-1412, Reference Manual

Page: 79 / 172

www.gateway.com
71
Changing batteries
To replace the battery:
1
If your notebook is on and is connected to AC power, go
to step
2 .
-OR-
If your notebook is on and is not plugged into an AC
outlet, save your work and turn off the notebook.
2
Turn your notebook over so the bottom is facing up.
3
Slide the battery lock to the unlocked position, then slide
the battery release latch.
4
Slide the battery out of the notebook.
5
Slide a recharged battery into the notebook until it snaps
into place.
6
Slide the battery lock to the locked position.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your Gateway notebook.
Discard used batteries according to local hazardous material regulations.
The batteries used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate. Dispose
of used batteries promptly. Keep away from children.
Caution
If your notebook is connected to AC power you can change the battery
while the notebook is turned on. If your notebook it is not plugged into an AC
outlet, you must turn the notebook off while changing the battery.