Gateway KAS-303, System Manual

Page: 47 / 122

41
Setting up your speakers
www.gateway.com
Speaker distance settings
When using 5.1 channel surround playback with Dolby Digital or DTS sources,
the center and surround speakers should be the same distance from the main
listening position as the front speakers. By specifying the distance between the
listening position and each speaker, the center and surround speaker’s delay
times automatically adjust to create the ideal listening environment.
To adjust the speaker settings:
1
Press the Speaker Setup button on the remote control to cycle
between the available Speaker Setting Modes.
2
When the Speaker Setting Mode you want to adjust is selected, press the
Adjust Up or Adjust Down buttons on the remote control to
change the speaker setting.
■ When adjusting the Crossover Frequency setting for your subwoofer, the
available options are 80 Hz, 120 Hz, 160 Hz, and 200 Hz. Your KAS-303
Home Theater satellite speakers have a range of 150 Hz ~ 18.5 KHz, so set
the subwoofer Crossover Frequency to 160 Hz.
You can also adjust speaker settings using your remote control and the OSD.
For more information, see “OSD menus and options” on page 66.
You can also adjust speaker settings using the SETUP button on the receiver
Displayed symbol Corresponding setting
F Front
C Center
S Surround
L Large
S Small
N None
SPK SET
-ADJUST-