Gateway KAS-303 System Manual Download Page 109

Page: 109 / 122

103

Safety,

Regulatory, and

Legal Information

Important safety
information

Read Instructions - All the safety and operating instructions should be
read before the product is operated.

Retain instructions - The safety and operating instructions should be
retained for future reference.

Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.

Follow Instructions - All operating and use instructions should be
followed.

Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

Summary of Contents for KAS-303



























































































































Search results

Summary of Contents for KAS-303

Reviews:

Related manuals for KAS-303

Brands by name

Popular brands

Gateway KAS-303, System Manual

Search results

Summary of Contents for KAS-303

Reviews:

Related manuals for KAS-303

Brands by name

Popular brands