manualshive.com logo in svg

Gateway KAS-303, System Manual, Page: 114 / 122

Share
Download
Gateway KAS-303 System Manual Download Page 114

108

Safety, Regulatory, and Legal Information

www.gateway.com

Television antenna connectors protection

External television antenna grounding

If an outside antenna or cable system is to be connected to your receiver, make sure that the 
antenna or cable system is electrically grounded to provide some protection against voltage surges 
and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to 
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an 
antenna discharge unit, size of grounding conductors, location of antenna discharge unit, 
connection to grounding electrodes, and requirements for the grounding electrode.

Lightning protection

For added protection of any Gateway product during a lightning storm or when it is left 
unattended or unused for long periods of time, unplug the product from the wall outlet and 
disconnect the antenna or cable system.

Summary of Contents for KAS-303



























































































































Reviews:

No comments