Gateway FMC-901, User Manual

Page: 16 / 116

10
Press and hold the Learn button on your RF
receiver for 2 seconds then release the button.
The
Status light on the receiver blinks slowly to
indicate the receiver is in the Learn mode .
2
Tip:
When synchronizing the wireless keyboard and mouse, make sure
that you synchronize (teach) both the keyboard and mouse during
the same Learning mode session. If you synchronize one wireless
device and later enter the Learn mode to synchronize the other
wireless device, the Learn mode erases all previous learned settings
from memory and looks for new devices.
After the Teach/Learn sequence is complete, the receiver, keyboard,
and mouse remain synchronized after turning off your Family Media
Center or changing the channels the devices operate on. You only
have to perform the Teach/Learn sequence when the devices are
first installed or when adding additional devices to the system. For
more information about changing the mouse or keyboard channels,
see “Changing the keyboard or mouse channels” on page 34.
To synchronize the wireless mouse and keyboard
Before synchronizing the mouse and keyboard,
make sure that the RF receiver is connected to
a USB port on your Family Media Center, the
batteries are installed in the keyboard and the
battery pack is fully charged and installed in the
mouse. For more information, see “Setting up and
synchronizing the wireless keyboard and mouse”
on page 8.
1
Learn button
To connect the wireless mouse and keyboard
RF receiver
Connect the wireless keyboard and mouse RF
receiver to one of the USB ports on the back of
your Family Media Center.
•