Gateway E-Series, Reference Manual, Page: 37 / 134

www.gateway.com
31
Using a memory card
To insert a memory card:
1
Insert the memory card into the appropriate memory
card slot.
2
To access a file on the memory card, click Start, then
click My Computer. Double-click the drive (for example,
the
E:
drive), then double-click the file name.
To remove a memory card:
•
Wait for the memory card reader access indicator to stop
blinking, then pull the memory card out of the slot.
Caution
Before inserting a memory card into a slot, make sure that the slot is
empty, or you could damage the card reader.
Caution
Do not remove the memory card or turn off the computer while
the memory card reader access indicator is blinking. You could lose data.
Also, remove the memory card from the reader before you turn off the
computer.
Important
Do not use the safely remove hardware icon in the taskbar to
remove the memory card, or you will have to restart the computer to
re-enable the memory card reader.
8512732.book Page 31 Thursday, September 27, 2007 11:33 AM