Gateway E-155C Service Manual Download Page 6

Page: 6 / 86

Replacing Convertible Notebook Components

Use this service guide to help plan maintenance tasks for the following Gateway convertible
notebooks:

•

E-155C

All tasks covered in this guide can be performed by an authorized field technician without
jeopardizing the convertible notebook’s warranty.

Identifying the convertible notebook model

The label on the bottom of the convertible notebook contains information that identifies the
convertible notebook model and its features.

Important

This service guide is not intended to be provided to individual users or consumers. It

cannot be provided to anyone other than an authorized service provider.

Important

For information on the convertible notebook’s general maintenance, technical

support, safety notices, and regulatory notices, see the convertible notebook’s user guide.

Important

If you have suggestions regarding the content of this guide, send an e-mail with the

subject “Service Guide Comments” to [email protected].

Caution

It is important that you use the correct service guide for the convertible notebook.

Failure to follow the approved tasks for the convertible notebook model may result in damage
to the convertible notebook.

Website: www.gateway.com
Online Support:

www.gateway.com/support

Tech Support Phone:

Hours:
Model:
S/No:

Summary of Contents for E-155C























































































Search results

Summary of Contents for E-155C

Reviews:

Related manuals for E-155C

Brands by name

Popular brands

Gateway E-155C, Service Manual

Search results

Summary of Contents for E-155C

Reviews:

Related manuals for E-155C

Brands by name

Popular brands