Gateway E-155C, Service Manual

Page: 51 / 86

www.gateway.com
47
11
Turn the audio board over, then disconnect the audio cable from the old audio board. Make
sure you pull the plastic tab, not the cable.
12
Connect the audio cable to the new audio board.
13
Place the new audio board so that the large post in the bay fits within the large hole in the
board, then replace the screw removed in
Step 9 .
14
Replace the modem by following the steps in “Replacing the modem” on page 42 .
15
Replace the system board by following the steps in “Replacing the system board” on page 35 .
16
Replace the palm rest by following the steps in “Replacing the palm rest” on page 25 .
17
Replace the hard drive by following the steps in “Replacing the hard drive” on page 17 .
18
Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14 .
19
Reconnect the antenna wires to the wireless card by following the steps in “Replacing the
IEEE 802.11 wireless card” on page 10 .
20
Replace the memory bay cover by following the steps in “Adding or replacing memory
modules” on page 6 .