Gateway ALR 9000, User Manual

Page: 29 / 64

Rear Panel 13
Mouse Port
This port supports any mouse with a miniature circular DIN (mini-DIN)
connector.
Keyboard Port
This port supports any keyboard with a miniature circular DIN (mini-DIN)
connector.
Serial Port 1
This is a high-speed serial port which uses the First-In-First-Out (FIFO)
protocol. If you have a serial mouse, connect it to this port. Other serial
devices such as serial printers or modems can also be connected this port.
Serial Port 2
This is a high-speed serial port which uses the First-In-First-Out (FIFO)
protocol. Serial devices such as serial printers or modems can also be
connected this port.
Power Supply Fault Reset Switch
In the event of a power supply failure, pressing this switch turns off the
alarm signal and resets the power supply.
Chassis Keylocks (2)
The rear panel is designed with two loop keylocks in which you can install a
padlock each to secure the right and left panels.
Redundant Power Supply Subsystem
Standard equipment includes three hot-pluggable, redundant power
supplies (two 350-Watt N+1 modules and one spare). The system can
support up to four identical power supply modules which yield a redundant
power of 700-Watts.
Note:
If your mouse has a mini-
DIN connector, you must
connect it to the Mouse
Port.
USRGUIDE.BOO Page 13 Thursday, July 16, 1998 10:41 AM