manualshive.com logo in svg

Gateway ADAC Ultra2 S466, Hardware Manual

Share
Download
Gateway ADAC Ultra2 S466 Hardware Manual Download Page 47

Chapter 4    Features

33

Software Utilities

The ADAC Ultra2 S466 software utility features include:

Specification

Feature

Graphical user interface

Yes

Management utility

Yes

Bootup configuration via ADAC Configuration Manager

Yes

Online Read, Write, and cache policy switching

Yes

Internet and intranet support through TCP/IP

Yes

Operating System Software Drivers

Operating System Drivers  ADAC Ultra2 S466 includes a DOS software

configuration utility and drivers for:

•

 

Windows NT V4.0

•

 

Novell NetWare 4.x,

•

 

OS/2,

•

 

SCO UnixWare 2.1x, and

•

 

SCO Open Server R5.0x

The DOS drivers for ADAC Ultra2 S466 are contained in
the firmware on ADAC Ultra2 S466 except the DOS ASPI
and CD-ROM drivers. Call your Gateway OEM support
representative for information about drivers for other
operating systems.

Summary of Contents for ADAC Ultra2 S466

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands