Gateway 995, User Manual, Page: 74 / 176

68
Chapter 4: Installing Components
www.gateway.com
If you are adding a new drive, remove the four screws that secure the hard
drive spacer to the drive tray, then remove the spacer from the tray.
6
Line up the screw holes in the new drive with the holes in the side of the
drive tray, then secure the drive to the tray with the four screws you
removed in
Step 5 .
7
Make sure that the tray’s release lever is open, then slide the new drive
into the empty hot-swap bay.
8
Close the drive’s release lever.
Replacing the hot-swap hard drive cage
To replace the hot-swap hard drive cage:
1
Follow the instructions in “Preventing static electricity discharge” on
page 36 . Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2
Remove the front cover, if installed. For instructions, see “To remove the
front cover:” on page 39 .
Screw
Screw
Screw
Screw