Gateway 850, User Manual, Page: 56 / 88

52
Chapter 4: Troubleshooting
www.gateway.com
Host SCSI channel problems
Device SCSI channel problems
Symptom Solution
The host SCSI BIOS scan
hangs. Check that termination is set correctly in the
Configuration Menu and the drive enclosure. Check
that the device ID set in the software does not conflict
with any other devices on the host SCSI channel. If
you have a long SCSI cable, try a different or shorter
cable.
Problem Solution
Not all drives connected to
the controller device
channels are displayed
during boot, or the controller
hangs during display of
connected drives. See “Setup and Installation” on page 13 to be sure
that the enclosure is correctly configured. Check
termination and ID assignment. If you have enabled
Ultra/Ultra2 SCSI on any device channels, try
disabling it.