10 Gateway ALR 8300 User’s Guide
Buttons
The table below shows the front panel buttons and their functions. See
Figure 2 on page 9 for the locations of the buttons.
Internal 3.5-inch drive bay
The system includes an internal 3.5-inch drive bay to accommodate a
3.5-inch IDE hard drive or other 3.5-inch device that does not need to be
accessed from outside the system.
LED indicators
The table below shows the front panel indicator LEDs and their functions.
See Figure 2 on page 9 for the locations of the indicator LEDs.
Switch
Function
Power
Turns the system on or off.
Reset
Allows you to reset the system without powering
it off and then on again
Keyboard lock
Enables or disables the keyboard functions and
clears the error flag after an ECC error. Pressing
this button does not correct the error condition. If
you have not corrected the error condition, the
ECC fault LED will light again.
LED
Meaning When Lit
Power
The system is on.
Hard disk controller
activity
The hard disk is being accessed.
P1 activity
The first processor is active.
P2 activity
The second processor is active.
ECC fault
A memory error has been detected.
Power supply fault
One of the power supplies has failed.
Hard disk activity (6)
The corresponding LVD SCA drive is being
accessed.
4080TL.book Page 10 Tuesday, December 22, 1998 2:50 PM
