background image

ISSUED: 04-21-03  SHEET #: 055-9158-1

8 of 8

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

PEERLESS LIMITED WARRANTY

Peerless warrants its products, under normal use, to be free from defects in material and workmanship for a period of five years
from the date of purchase. Peerless, at its sole discretion, will repair or replace such defective equipment free of charge provided
the products are returned prepaid to Peerless. Thereafter, repairs will be made at established factory prices. Unauthorized service
or repairs by anyone other than authorized Peerless personnel renders this Warranty void and releases Peerless from any further
responsibility or obligation. Any damage caused by failure to observe proper packing or to observe instructions for installation, by
accident or in transit or elsewhere will not be covered by the Warranty. This Warranty is in lieu of all other Warranties expressed
or implied, and no one is authorized to assume any liability on behalf of Peerless or impose any obligation on it in connection with
the sale of any product other than as outlined above. In no event will responsibility be assumed or implied for consequential
damages arising from the theft of any product secured by a Peerless security device, by delay of installation, interrupted operation
or other causes.

Summary of Contents for 210









Reviews: