ISSUED: 04-21-03 SHEET #: 055-9158-1
7 of 8
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
To adjust roll, pitch, and yaw loosen the set screw
(shown below) using security allen wrench (B) or
standard 4 mm allen wrench. You should be able to
just slightly loosen the screw so that your adjustments
can be set without having to hold the projector. Move
projector to desired position and slowly tighten set
screw.
Note: Be sure not to touch the projector while
tightening the set screw. This may cause the image
to be unaligned when you let go.
IMPORTANT: Security allen wrench (B) is your key for
projector removal. Store it in a safe place.
© 2003 Peerless Industries, Inc. All rights reserved.
SET SCREW
Attach bracket (K) to ball and socket assembly (A)
using 1/4 - 20 nut (E).
Press button on side of projector to lift projector foot.
Slide bracket (K) under projector foot. Push foot
down. Secure bracket (K) with 1/4 - 20 socket pin
screw (D).
A
WOOD
JOIST
CEILING
PROJECTOR
WOOD
JOIST
CEILING
PROJECTOR
D
E
K
A
CUTAWAY VIEW OF
CEILING PLATE (G)
K
PROJECTOR
FOOT
