Adding or replacing memory modules
69
9
Pull the memory module out of the slot.
Important
Use only memory
modules designed for
your Gateway
notebook.
10
Hold the replacement module at a
30-degree angle and slide it into the empty
memory slot. This module is keyed so it can
only be inserted in one direction. If the
module does not fit, make sure that the
notch in the module lines up with the tab
in the memory bay.
11
Gently push the module down until it clicks
in place.
12
Replace the memory bay cover, then
tighten the captive screw.
13
Insert the battery, then turn your notebook
over.
14
Connect the optional port replicator.
-OR-
Connect the power adapter, modem cable,
and network cable.
15
Reconnect all peripheral devices and
replace any PC cards.
Summary of Contents for 200ARC
