4
–
Configuration & Operation
NetXpress LX & CM-30R Installation & Operation Manual
Version 1.1
GatesAir, Inc.
4-23
Intraplex Products
Remote
IP
Address
: The specific address for this contact; the IP address where the contact state is
sent. The IP address can be unicast or multicast.
State
: Whether the contact is currently asserted or not asserted.
Active Level:
The contact priority when active:
Active high
or
Active low
.
Edit
: Click
to configure the input contact.
To configure or edit an input contact, perform these steps:
1.
Click
on the row of the contact to be configured. The
Configure Input Contact
dialog box
appears (Figure 4-25).
Figure 4-25. Configure Input Contact Dialog Box
2.
To change the location of the dialog box on your monitor page, click and hold
while
dragging the dialog box as desired.
3.
Type the
input contact’s
Remote IP Address
.
4.
Click an
Active Level
option
to signify the contact’s priority
:
Active high
or
Active low
.
5.
Click
Submit
to apply changes.
6.
Click
Close
or
to exit the dialog box.
Output Contacts
Contact
: The number assigned to the contact.
Remote
IP
Address
: The IP address from which the contact state messages are processed. For
unicast contact transport, this field is read-only; you cannot change it. For multicast operation, use
this field to configure the multicast group.
State
: Whether the contact is currently
Asserted
or
Deasserted
.
Edit
: Click
to configure the output contact.
To configure or edit an output contact, perform these steps:
1.
Click
on the row of the contact to be configured. The
Configure Output Contact
dialog box
appears (Figure 4-26).
