7
124756 / 6-2014
S A F E T Y
Safety Information
General Safety Practices
1.
READ and UNDERSTAND the Operator’s Manual
before using any equipment. Review at least annually
thereafter.
2.
VERIFY all safety devices and shields are in place
before using any equipment.
3.
KEEP hands, feet, hair and clothing away from
moving parts.
4.
STOP engine, place all controls in neutral, set parking
brake, remove ignition key and wait for all moving
parts to stop before servicing, adjusting or
maintaining.
5.
BE CAREFUL when working around high pressure
hydraulic system.
6.
DO NOT ALLOW RIDERS.
7.
NEVER allow anyone unfamiliar, untrained or
complacent operate the implement.
8.
ESCAPING FLUID HAZARD: Escaping hydraulic
fluid under pressure can penetrate the skin causing
serious injury. Relieve pressure before disconnecting
the hydraulic lines.
• Check/tighten all connections BEFORE applying
pressure
• Use a piece of cardboard or paper to search for
leaks.
• NEVER use your hand.
• IF ANY fluid is injected into the skin, seek
immediate attention.
Safety During Transportation
1.
ONLY TOW at a safe speed do not exceed speeds
higher than 25 mph (40 km/h). Use caution when
making corners and meeting traffic.
2.
ALWAYS use a safety chain between tractor drawbar
and implement hitch when transporting on public
roads.
3.
ALWAYS use transport locks when transporting on
public roads.
4.
BE SURE implement hitch is securely fastened to
hitch equipped with hammer strap on large tractor
before operating hydraulics.
5.
COMPLY with local lighting, marking and oversize
regulations when transporting on highways.
6.
FREQUENTLY check for traffic from rear, especially
during turns.
7.
BE CERTIAN tractor weight is equal to or greater than
coulter disk weight.
8.
ALWAYS be certain that no one is behind or around
implement before moving.
9.
BE SURE no upward pressure is exerted on tractor by
coulter disk tongue before disconnecting from tractor.
10. NEVER subject the implement to steep sides / grades
while in transport position.
This safety alert symbol is used to denote possible danger and care should be taken to prevent bodily
injury. When you see this symbol is means: ATTENTION!, BECOME ALERT! and/or YOUR SAFETY IS
INVOLVED!
WARNING: Safe practices must be followed when assembling this equipment. All personnel
involved must:
• Read and understand the instructions and manuals for this machine.
• Be instructed in the safe use of tools and all lifting devices involved in the assembly of this equipment.
• Clear the area of all personnel not involved in the assembly of this machine.
Summary of Contents for Magnum Coulter Disk
