124756 / 6-2014
24
O P E R A T I O N & M A I N T E N A N C E
Maintenance (Cont’d)
General
Daily (10 hours):
•
Grease all pivot pins located on wing lift, disk lift arms,
hitch, wheels and wheel lifts.
Figure 29
•
Check all wheel nuts for tightness. The recommended
torque is 110 lb-ft (149 N•m).
Figure 30
•
Visually inspect coulter hubs for looseness. Tighten if
necessary.
Figure 31
•
Remove mud from between wheels (item 1) and lift
arms (item 2) which may dry and cut into the side wall
of the tires.
•
Check for loose fasteners and tighten securely.
Seasonally (100 hours):
•
Grease wheel and coulter hubs and inspect for
looseness.
•
Grease all pivot pins.
•
Check and adjust tire pressure.
Tire Inflation
Recommended tire inflation is 120 PSI.
Post Operational Storage or Before Storage:
•
Perform or check items listed under daily and
seasonal maintenance.Inspect the implement to be
sure all components are field ready. Replace worn
coulters.
•
When placing the coulter disk in storage for more than
one month, coat all exposed ram surfaces with a thick
oil or grease to protect them from nature’s elements.
•
Install lift locks & wing locks if stored raised.
GM00041
GM00044
GM00067
2
1
1
2
Summary of Contents for Magnum Coulter Disk
