F55 Setup
Page 32
Seal Check
Seal Check Manual.
Follow the procedures in the Seal Check manual for verifying
integrity of the housing.
CAUTION.
ENSURE THE FITTING PLUG IS INSTALLED PRIOR TO
SUBMERSION! FAILURE TO DO SO WILL RESULT IN A
Final Checks
Visual Inspection.
Look closely at all seal mates – Port, Port Ring, Front Bulkhead
and main Housing seal – for gaps. Look over the housing one final time.
Verify operation.
As a final check, power on the camera and verify all controls are
functioning normally.
If you have the optional HD-SDI surface feed cable, ensure
an image is present at the surface end.
