G4-508HD4a User Manual & Install Guide
Configuring the G4-508HD4a
96 of 162
§
Channel 9 – set name as –
CH9
§
Channel 10 – set name as –
CH10
§
Channel 11 – set name as –
CH11
§
Channel 12 – set name as –
CH12
Enable
Checkbox – if selected, enables this channel for
inclusion into the main stream recording.
DEFAULT SETTINGS:
For channels 1 to 8, only enable the channels
which actually have cameras connected. Please
note that the system will show a videoloss
message on channels which are enabled, but do
not have a connected camera (i.e., no incoming
video stream).
Likewise, for channels 9 to 12 (which are Digital IP
Camera channels), only enable the channels
which actually have cameras connected.
Resolution
Drop list for selecting the resolution to record the
video on this channel (applicable to channels 1 to
8):
§
CIF
(352x240)
§
WCIF
(464x240)
§
HD1
(704x240)
§
WHD1
(928x240)
§
D1
(704x480)
§
WD1
(928x480)
For the Analog HD (Channels 1 to 8) and Digital IP
Cameras (channels 9 to 12), the drop list contents
will change to reflect the supported resolutions of
the currently attached IP cameras. Most
commonly, these will typically be:
§
720P
(1280x720)
§
1080P
(1920x1080)
DEFAULT SETTINGS:
For channels 1 to 8 (analog camera channels), set
the following:
§
D1
For channels 9 to 12 (IP camera channels), set the
following:
§
720P
§
1080P
