G4-304SD1
User Manual & Install Guide
114 of 149
Event
Alarm
DEFAULT SETTINGS:
Disabled/not applicable.
Trigger
Click the ( Setup ) button under Trigger to
display the Trigger setup screen.
DEFAULT SETTINGS:
Disabled/not applicable.
Early Difference: Numeric field to key in a value for when the vehicle goes over a specified
speed prior to the actual speed limit.
Speed: Numeric field to key in the speed value over which the device will flag an over speed
alarm.
Alarm Duration: Numeric field to set the duration of the alarm (in seconds).
Save Settings: Click the ( OK ) button to save the alarm settings.
Back to Previous: Click the ( Cancel ) button to return to the previous screen without saving.
Linkage
Click the ( Setup ) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm.
The Linkage setup screen enables you to
configure the following options:
Channel – checkboxes which allow you
to select any combination of the
