31
TEMPERATURE.
If Temperature is enabled in the configuration of the 504-HD and the
ALARM setting has been set to ON, the output can be viewed as part of the
Device Status within G4 viewer, or, by selecting Event Files within the
Recorded Video menu option.
CAMERA
Motion Detection and Blind are not currently supported.
With Video Loss enabled, if there is a problem with the video feed from
the camera the 504-HD will detect this. With VL Enabled and Alarm set
to ON when there is Video Loss detected the OSD will display an Alarm
warning.
VOLTAGE
Low Voltage Protection is OFF by default. If Enabled Highs; Lows and
Measurements in-between will be displayed as part of the Device Status
within G4 viewer.
EMERGENCY EVENT.
Determines if the Driver Alert Button will activate an alarm when pressed
by the driver of the vehicle.
If Alarm is set to ON a marker will appear as part of the OSD and video
playback file.
LOCK sets if the video file produced will be overwritten when the
COMRAD™ has reached its capacity.
Figure 18: Emergency Event.
