14
GPS
The 504-HD can be outfitted with an optional GPS module. For optimum results it is recommended that the GPS module be
exterior mounted utilizing the magnetic base with the cable protected by a suitable grommet.
If it is not possible/practical to have the GPS module exterior mounted, the GPS module must be mounted internally with a direct
line of sight vertically skyward.
Driver Alert Button.
A Driver Alert Panel is available as an optional accessory for the 504-HD. The Driver Alert Panel must be installed using the
provide Tek screws. The Driver Alert allows for the driver of the vehicle to press the button and mark the recorded video with an
Alert. This makes searching for Alerts far faster and easier as G4 viewer can be set to display Alarms/Alerts.
The Driver Alert Panel is connected to CAB000323.
CAB000323 has two bundles of wires labeled 485–3 and 485-4.
Connect the Driver Alert Panel to bundle 485-3.
The Driver Alert Panel requires setting up in the configuration of the 504-HD. Navigate to System Settings
Peripheral
Ext.Com Setup. Select the following options:
Mode
STANDARD
COM1
NONE (232-1)
COM2
NONE (232-2)
COM3
CONTROL PANEL (485-3)
COM4
ACCELERATION (485-4)
