8
20
13
-0
9-
05,
1
1
5
8
2
7
4
3
6
PMS 322 C
DIN PARTNER I VÅRDEN
Maintenance
The chair is fabricated from stainless steel tube, powder coated and aluminium. Exposed parts
that are not printed on meet of aluminium/stainless steel. Take care to check that the product feels
stable/free from play – no fasteners may be loose. Damaged or defective parts should be replaced
as soon as possible.
Cleaning
• Clean the chair by wiping with regular cleaning
agent or place in a washer/autoclave (max 85°C).
• Clean the back straps with cleaning agent
(non-desiccant) or machine wash them at 85°C
(see also back strap instructions).
• Remove the seat and clean it separately or wash
it in a washer/autoclave (max 85°C).
Special check items (once per year)
1. Armrest – check that slip protection/wrist
protection are intact and secured.
2a) Electric actuator/recliner: check the function of
the remote control and that the electric actuator
attachment devices are not loose.
2b) Gas strut/tilting – Check the tilt function;
tension the wire as necessary.
3. Seat/stopped seat – whole and without
cracks. No sharp edges may be present.
4. Foot support platforms – whole and
adjustable in the intended manner.
Check that the clips are whole and
properly fastened. Heel restraints must be
in position at the back of each foot support platform.
5. Wheels – may not be stiff or loose. Also check that the brakes work.
6. Neck support – check that the neck support can be adjusted to the desired position.
When necessary – tighten fasteners.
7. Back strap; the back strap must be intact and may not have any holes or other damage to
the belts and anchors.
8. Height adjustment mechanism – check that the seat can be locked on both sides regardless
of height.
Would you like to know more?
Contact us at: Tel: +46 371 31800
Gate Rehab Development AB
Industrigatan 2 | SE-330 21 Reftele
[email protected] | www.gaterd.se
YOUR HEALTHCARE PARTNER
