![background image](http://html1.mh-extra.com/html/gate/easy-softback-56-270/easy-softback-56-270_instructions-for-use-manual_3725574006.webp)
6
12
13
14
1
2
Installing seat with the rear opening (accessory)
The seat comprises two halves that
are snapped in place with the aid of
clamps on the seat’s underside.
Locking the armrests
Driving the chair
The armrest is locked in the extended
position. To lift the armrest, pull out the
pin (1) and raise the armrest (2).
We recommend using the handlebar
whenever the chair must be moved
(with/without a patient). The handlebar
is designed so that the chair can be
moved forwards and turned easily
using little force.
Actuator calibration (Up/Down) - Only Easy TILT/EL
If power is cut to the control box during operations or in direct connection to operations
(within 5 seconds of the chair’s having been manoeuvered) it may mean that the
UP/ DOWN function has ceased to work. It is then necessary to reset/recalibrate the
actuator position sensors.
Calibration:
1. The press both of the remote control buttons UP/DOWN simultaneously for around
10 seconds until a beep is heard. Release the buttons.
2. Be pressed the DOWN button and run the chair to its minimum position.
Release the button.
3. The chair is now calibrated and can be used normally.