REVISION 2019-2
GateMotors: +44 (0)1202 744958 • Technical support: +44 (0)1202 725489
www.gatemotors.co.uk • Sales and Accessories: +44 (0)1202 717191
myGate is a trademark of Proteco S.r.l.
declares that the products listed below:
myAster 3, myAster 4, myAster 5 and myAster 6 – electromechanical gear motor for swing gates
comply with the following Essential Requirements of Directive 2006/42/CE Annex I (Machinery directive):
1.1.2 1.1.3 1.1.S 1.2.1 1.2.2 1 .2.3 1.2.6 1.3.2 1.3.4 1.3.9 1.4.1 1.4.2.1 1.5.1 1.5.4 1.5.6 1.5.8 1.5.13 1.6.1 1.6.4 1.7.1 1.7.3 1.7.4
are in conformity with the following directives:
2004/108/CE (electromagnetic compatibility)
1999/5/CE (R&TTE)
2011 /65/CE (directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment)
The above listed products are delivered, limitedly to the applicable parts, according to the following standards:
- EN 12453
Industrial, commercial and garage doors and gates.
Safety in use of power operated doors. Requirements
- EN 12445
Industrial, commercial and garage doors and gates.
Safety in use of power operated doors. Test methods
- EN60335-1
Safety of household and similar electrical appliances -
Part I: General requirements
- EN60335-2-103
Household and similar electrical appliances -
Part 2-103: Particular requirements for drives for gates, doors and windows
They also state that:
-
the relevant technical documentation is compiled in accordance with part B of Annex VII of directive 2006/42/CE
-
the relevant technical documentation is compiled and preserved by PROTECO SRL which undertakes to transmit it by mail in
response to a reasoned request by the national authorities.
-
the partly completed machinery must not be put into service until th final machinery into which it is to be incorporated has
been declared in conformity with the provisions of the directive 2006/42/CE
EU DECLARATION OF CONFORMITY
This compliance declaration combines the content of separate compliance declarations for any product
mentioned; a copy of the original compliance declaration of each product can be obtained from PROTECO Sri.
Marco Gallo
Managing Director
January 19th 2016
