CONTROLLER INTSALLATION GUIDE
8 /
C o n t r o l l e r I n s t a l l a t i o n G u i d e - V e r s i o n 2 0 . 2
Step 2 - Attach Power Cable Terminals
Determine whether the power cable will span the distance between the battery and the
location you have chosen to mount the controller module.
The power cable can be extended with 14 or 16 gauge 2-stranded marine grade cable. It is
best to connect the cable extension using a weather-proof junction box with enclosed
terminals block.
You should attach eyelet terminals to the power
cable wires. Your product is provided with two
(2)
5/16”
eyelet terminals which will fit most
marine battery posts.
If you have extended the power cable, you will
need to strip the cable jacket to expose
3/8” of
the wire.
Insert the wire into the base of the eyelet.
Using a pair of cable crimpers or pliers, clamp
the eyelet terminal onto the wire.
Ensure the terminal is securely fastened to the
cable!
Repeat this procedure for both the wires within the power cable that have the black & white
insulation. You can cut-back and discard the wire with the green insulation - it will not be used
for this installation.
