Gastros 1 14 200 00, Original Instructions Manual

Page: 33 / 56

33
The manufacturer’s warranty includes des ign, production, and material defects. Further claims, including defects
due to incorrect operation, are excluded. All data and notes in this manual are prepared with consideration to the
statutory standards and regulations. Gastros Switzerland AG will not be liable for:
•
Failure to observe the instructions
•
Damages caused by inappropriate handling
•
Deployment of unqualified staff
•
Unauthorized modification
•
Technical modifications
•
Use of uncertified spare parts
Do not use the InductWarm ® 140 unit if you notice any potential damage or malfunction.
Individuals with pacemakers should consult their doctor to clarify whether they are allowed to be near
an induction device.
The InductWarm
®
140 unit may represent a source of danger if: (1) the information in these operating
instructions is not heeded, (2) setup, maintenance or repair work is undertaken by nonauthorized
persons or (3) the InductWarm
® 140 unit is used incorrectly or for purposes other than its intended use.
Other risks may include:
•
Risk of destruction
When the induction unit is not in use for warming food, it is crucial to ensure that the device is turned off.
Otherwise, damage or burnings may occur as a result.
•
Electrical shock
Do not expose this system to liquids or metal objects, as this may cause electric shock.
•
Environmental conditions
The system must be mounted in a clean, dry indoor place and the relative humidity must not exceed 60%.
To avoid overheating, ensure good ventilation. The environmental temperature must not exceed 40 °C /
104 °F.
• Risk of burns
Vessels used with this device become hot during operation and can cause burns. Please use potholders or
protective gloves when touching these parts.
•
Slippery floor
Be careful with possible slippery floors adjacent to the appliance.
Immediately disconnect the InductWarm
®
140 from the power net if the cover material (e.g., artificial
stone, glass, etc.) gets darker or shows cracks.
Dishes may reflect some heat back to the counter surface in the area right above the induction coils. For this
reason, an appropriate cooling time should be observed. After switching off the device, make sure that no dish
is placed on top. Do not rely on the “dish detection” feature.
Do not use metal cutlery, PVC/plastic, aluminium foil, or other metallic objects in combination with the
InductWarm
®
140 unit.
It should be noted that finger rings, watches, bracelets, or other jewellery can heat up if they are close to the
induction field. This can cause burns.